Crossover PCBs for C-note MT Bookshelf DIY Speaker

Description

Listing is for 1 pair PCBs also known as circuit boards fitted for the standard components provided from Parts Express (Part #300-7140) for DIY C-Note MT bookshelf speaker kit. This auction is for the boards only with terminal blocks and mounting screws. Each PCB measures 112mm x 84mm x 1.57mm thick. These are high quality dual layered boards with HASL finish with soldering points on both sides of each board.
These boards will save you time and give you the peace of mind of a secure connections.
Please look at my feedback on this board. Take caution when assembling your components, epoxying your inductors, and wiring up you drivers. Feel free to contact me with questions. Good Luck!!!
Please check out my other auction for the Overnight Sensations MT Speaker
Included parts in this listing are:
2 PCBs (112mm x 84mm x 1.57mm)
6 terminal blocks (14-22 guage)
8 Nylon spacers (3mm)
8 Screws (Stainless #4 1/2" phillips)
The supported parts required from Part Express are:
2 027-423 Dayton Audio DMPC-5.1 5.1uF 250V Polypropylene Capacitor
4 027-414 Dayton Audio DMPC-2.0 2.0uF 250V Polypropylene Capacitor
2 027-424 Dayton Audio DMPC-6.8 6.8uF 250V Polypropylene Capacitor
2 004-6 Dayton Audio DNR-6.0 6 Ohm 10W Precision Audio Grade Resistor
2 257-026 Dayton Audio 0.25mH 20 AWG Air Core Inductor Crossover Coil
2 257-051 Dayton Audio 1.4mH 20 AWG Air Core Inductor Crossover Coil